Common Planner
K–12 Standards

Electromechanical Generation & Maintenance (2015): Grades 9, 10, 11, 12, Higher Education

Other Colorado CTE sets

Explain the generation of electricity by traditional electromechanical methodsEMGN.01

  • 01.

    Explain basic electrical theoryEMGN.01.01

    1. a.

      Describe atomic structure, the components of the atom and their chargesEMGN.01.01.a

    2. b.

      Define electricityEMGN.01.01.b

    3. c.

      Compare and contrast DC and AC currentEMGN.01.01.c

    4. d.

      Analyze voltage, current and resistance in a circuitEMGN.01.01.d

    5. e.

      Utilize Ohm's Law to calculate voltage, amperes and resistance.EMGN.01.01.e

    6. f.

      Measure voltage, amperes and resistance.EMGN.01.01.f

  • 02.

    Analyze series and parallel circuitsEMGN.01.02

    1. a.

      Distinguish series from parallel circuits.EMGN.01.02.a

    2. b.

      Describe the role and function of resistors (loads).EMGN.01.02.b

    3. c.

      Explain and apply circuit theorems (e.g., superposition, Thevenin's and Norton's theorems).EMGN.01.02.c

    4. d.

      Analyze the operation of components and electrical loads connected in a series and parallel circuit.EMGN.01.02.d

    5. e.

      Calculate voltage, amperes, resistance and power in a series and parallel circuit.EMGN.01.02.e

    6. f.

      Utilize mesh and node current analysis techniques.EMGN.01.02.f

  • 03.

    Construct series and parallel electrical circuitsEMGN.01.03

    1. a.

      Identify the source of AC and DC voltage.EMGN.01.03.a

    2. b.

      Trace the path of generated AC and DC voltage from its source to where it is used.EMGN.01.03.b

    3. c.

      Discuss the frequency of AC voltage.EMGN.01.03.c

    4. d.

      Explain the difference between peak voltage and RMS.EMGN.01.03.d

    5. e.

      Explore the effects of a capacitor and inductor in an AC circuit.EMGN.01.03.e

    6. f.

      Calculate the frequency and period of an AC sine wave.EMGN.01.03.f

  • 04.

    Examine transformers, and three-phase and single-phase voltage.EMGN.01.04

    1. a.

      Explain and diagram the operation of a transformer.EMGN.01.04.a

    2. b.

      Contrast the difference between step-up and step-down transformers.EMGN.01.04.b

    3. c.

      Explain how inductance is used in the operation of a transformer.EMGN.01.04.c

    4. d.

      Distinguish between three-phase and single-phase voltage.EMGN.01.04.d

  • 05.

    Understand energy conversion processes and energy transmission systems used in the electromechanical power generationEMGN.01.05

    1. a.

      Interpret the theory of basic plant electrical components.EMGN.01.05.a

    2. b.

      Identify the components that make up a power generation systemEMGN.01.05.b

    3. c.

      Identify the source of mechanical energy in fossil fuel plants.EMGN.01.05.c

    4. d.

      Interpret the fundamentals of cycles (including vapor and combined power, co-generation, and Brayton and Rankin cycles) as they relate to energy resources used in the industryEMGN.01.05.d

    5. e.

      Diagram how water and steam move through the steam cycle and explain how this movement is monitored and controlledEMGN.01.05.e

    6. f.

      Diagram the water flow path through a typical drum boiler and explain how natural circulation makes this flow possible.EMGN.01.05.f

    7. g.

      Define the terms drum boiler and natural circulationEMGN.01.05.g

    8. h.

      Explain how steam is supplied to a turbineEMGN.01.05.h

    9. i.

      Describe in general terms the operation of a boiler.EMGN.01.05.i

  • 06.

    Analyze nuclear energy as a principle of energy science.EMGN.01.06

    1. a.

      Explain the scientific process of producing nuclear energy.EMGN.01.06.a

    2. b.

      Describe the various applications for nuclear energy.EMGN.01.06.b

    3. c.

      Identify and describe the functions of the components in a nuclear facility.EMGN.01.06.c

    4. d.

      Explore and diagram the uranium mining and conversion process for producing nuclear fuel.EMGN.01.06.d

    5. e.

      Describe the reprocessing potential of spent nuclear fuel.EMGN.01.06.e

    6. f.

      Contrast critical fusion reactors to radioisotope thermoelectric generators.EMGN.01.06.f

    7. g.

      Discuss the capacity of nuclear energy to produce and deliver power for energyEMGN.01.06.g

Frequently asked questions

What grade levels do these standards cover?
Grade 9, Grade 10, Grade 11, Grade 12, and HIGHEREDUCATION
When were these standards adopted?
2015
Where can I read the official document?
Electromechanical Generation & Maintenance

Find this useful?

If so, you'll love the standards search built into Common Planner.

Keep exploring

Keep exploring CTE standards

Sibling grade bands, other subjects in this jurisdiction, and the same subject across other states.

More Colorado CTE sets

CTE